AlfaRomeo Stelvio 2.9L 2020, Oil Dipstick Tube by Mopar®. Want your prized possession to look and perform the way it was designed to? Then top-of-the-line Mopar automotive parts and accessories are for you. Made using the latest manufacturing technology to meet the highest quality standards, Mopar parts provide outstanding
Step16: Remove Oil Fill Cap (if you didn't in step 5) Step 17: Place funnel in oil fill opening. Step 18: Fill your car with oil. NOTE: Alfa Romeo suggests 3.5 liters of 5w40 oil that meets or exceeds ACEA C3 Classification (for a 1.4TB 135pk) Different size motors may require different grades and amounts of oil.
Referencevalue for thermal expansion for engine oil is 0.007, so about 10% from 0C to 150C, or about half a litre for a 5 litre engine oil volume. If you measure and fill when cold you're likely therefore to overfill by up to 0.5L if it's designed to be read when warm/hot. Show more replies.
OilExctractor. I haven't tried it yet but I figured I'd ask just in case. 18 Giulia 2.0T Q4 (US spec). I've loved using my Schwaben Fluid Exctractor on my various other vehicles. Is there a port for the 2.0T as it doesn't use a dip stick? My various Audi had a plug where the dip stick would be as they used the electronic level sensor.

Surprisinglythe old fashioned dip stick is no more on this model. From the digital display screen on the console control knob by the gear shift to move the setting

2019Alfa Romeo STELVIO Transmission Fluid. Never install more fluid or lubricant than what is considered adequate according to gradients on dipstick or level of filler hole. Fill and drain locations are for reference only. Failure to perform adequate inspections or obtain proper resolution will limit or negate any liability toward AMSOIL INC.
P4ap.
  • olo95gtpqm.pages.dev/251
  • olo95gtpqm.pages.dev/215
  • olo95gtpqm.pages.dev/93
  • olo95gtpqm.pages.dev/499
  • olo95gtpqm.pages.dev/212
  • olo95gtpqm.pages.dev/445
  • olo95gtpqm.pages.dev/233
  • olo95gtpqm.pages.dev/515

    • alfa romeo stelvio oil dipstick location